Beco refrigeration equipment is equipped with a self-diagnosis system. It allows the user to quickly determine the cause of the breakdown. How it works? The error code is displayed on the Beko refrigerator display: the temperature indicator data is changed. If you notice such values on the screen, you need to see the decryption in the instructions or in our table.
Veko refrigerator malfunctions
When the icons appear on the display, reboot the equipment - it may be a system failure. For this:
- Unplug the unit.
- Wait 10-15 minutes.
- Retry the connection.
If the error appears again, then you need to proceed to the diagnosis and repair. See the table below for the meaning of the faults.
Temperature indicator flashes | Code value | Reasons for the appearance | How to fix the problem |
+2 | There were problems with cooling. |
| Your actions:
|
+3 | The heating element has failed. | Why did this happen:
| You must inspect the elements and replace if they are defective. |
+4 | There is no contact with the sensor. | The reasons:
| What should be done:
|
+5 | Shorted the sensor. | Why:
| Your actions:
|
+6 | The key on the control panel is activated. | The button is stuck or sunk. The element may have worn out or liquid has entered the panel. | You need to disassemble the panel and fix or change a broken key. |
+7 | There are problems with the compressor. | What could be the reason:
| How to fix the situation:
|
-12 | The switch does not work. | Poor wire connection between the main module and the switch. | Your task: checking the wiring, tightening the contacts. Replacing burnt parts. |
There may be other problems where the temperature on the display fluctuates.
- The compartment door often opens.
- The seal is damaged, which leads to the penetration of warm air into the chamber. You need to clean it with a blockage or install a new one.
- Loaded a lot of warm products. As a result, the temperature in the chamber rises, which leads to the operation of the sensor. Start the Supercooling mode if it is provided in the model. Or wait 20-30 minutes until the climate normalizes.
Some malfunctions of the Beco refrigerator can be eliminated independently. But such failures happen that require the intervention of an experienced craftsman and the availability of special equipment. If you are not sure that you can handle the problem, contact a service center.