Why does the Indesit washing machine show error F12 on the display? Models with electromechanical control show a malfunction code with lit indicators “Super wash” - “Launch delay”, or the “Revolutions” lamp flashes.
These signals indicate management problems. To accurately determine the cause of the breakdown, you need to analyze in detail what the error code means.
F12 is highlighted - code value
What does the error F 12 mean in the Indesit washing machine? This is a sign that the connection between the control unit and the power unit has disappeared. Simply put - the indicator lights do not respond to button presses, contact is broken.
Often F12 is displayed immediately after connecting the Indesit СМА to the network, after which the system freezes. To change the position, you have to reboot the system, and you need to do this correctly.
DTC F12 can occur both on electronic models with a scoreboard, and on electromechanical ones with an indication.
Reasons for the appearance of the F12 code
Most often, such malfunctions happen:
- Due to unstable voltage and power surges. Subsequently, the contacts burn out.
- The increased humidity of the room where the SMA is located, which leads to corrosion of the elements.
High humidity can affect the operation of the washing machine motor. It also corrodes, rusts and ceases to function normally.
How to fix a mistake with your own hands
Perform a reboot to reset the error:
- Turn off the Indesit machine by pressing the On / Off button.
- Unplug the power cord.
- Wait 2-3 minutes, then turn on the washer.
- If it was not possible to remove the F12 error from the Indesit panel, repeat the procedure three times.
If the fault code is still shown on the display, the contacts of the control and indication module may have blown.
What to do in this case? It follows:
- Open the front panel of the washer and remove the control unit.
- Inspect at the time of oxidation or damage.
- Inspect and check the J11 pin, which serves as the connection for these systems.
- If necessary, strip the connector.
- Then you need to check the Indesit washing machine for performance, if it does not work correctly, the cause of the problem lies in the circuit board.
How to fix a breakdown in the control board, we have already told. If she needs repairs, it is better to contact a professional who accurately diagnoses the breakdown and helps to establish work.
Often, when the machine gives an error, it is easy to solve the problem at home, on your own.